PW80 Standard Tire and Tube (Multiple Sizes)


It doesn’t matter if you’ve got a killer suspension or PW80 setup, or a motor that has vision distorting power, If you’re riding on tires that are worn out with rounded knobs, you’re not going to get the PW80 to stick in the corners, you’re braking performance is going to suck, and all around, you’re going to have trouble getting the bike to hook up on the straights and elsewhere. Just switching out some old rubber for new tires with sharp edges on the knobs can have such a profound difference that you’ll likely be changing tires on a much more regular basis after you get the feel of some fresh rubber under you.


SKU: Standard PW80 Tire and Tube Category:


PW80 Standard Tire and Tube

PW80 Standard Tire and Tube

Proper tire inflation is the MOST important aspect to tire maintenance on your PW80.

Tire pressure depends on riding conditions, terrain type and of course the type of tire you’re riding. The best way to determine the proper tire inflation is to check the tire’s service specs.

Improper tire pressure affects the following:

  • Over/under inflation can lead to tube or tire failure
  • Over/under inflation can cause irregular thread wear on the tires
  • Over inflation lessens the tire contact area with the riding surface
  • Over-inflation can cause the tire to wash out or slide around on top of the riding surface
  • Under inflation may result in the tire not staying beaded on the wheel
  • Under inflation affects the contact area and causes the tire to bow up in the middle leaving only the outer thread contacting the ground
  • Under inflation can cause the tires to grab into the riding surface

As you can see, tire pressure can greatly affects handling characteristics so it is a good idea to always check your tire pressure every time you ride for proper PSI.

Additional information

Weight 7 lbs
Select Size

2.5" x 14", 2.75" x 12", Both Tires


There are no reviews yet.

Be the first to review “PW80 Standard Tire and Tube (Multiple Sizes)”